建材产品CE认证测试标准
EN 13813:2002 Screed material and floor screeds-Screed material–Properties and requirements.
EN 13813:2002找平层材料和沥青地面，找平层材料，性能和要求。
EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels-Part 1: Technical delivery conditions.
EN 10219-1:2006非合金和细晶结构钢的冷成形焊接结构空心型材，交货技术要求
EN 10025-1:2004 Hot rolled products of structural steels. General technical delivery conditions.
EN 10025-1:2004结构钢热轧制品，通用技术交货条件。
EN 15088:2005 铝和铝合金，施工作业用结构产品，检验和交付技术条件。
EN 15088:2005 Aluminum and aluminum alloys-structural products for construction works-Technical conditions for inspection and delivery.
EN15102:2007+A1:2011—Decorative wallcoverings Roll and panel form products.
EN15102:2007+A1:2011—卷状、平板状墙体装饰覆盖物的测试要求
EN 845-1:2003+A1:2008 Specification for ancillary components for masonry-Part 1: Ties, tension straps, hangers and brackets.
EN 845-1:2003+A1:2008 砖石工程用辅助组件规范，第1部分：连接杆，带条，吊架和拖架。
EN 845-2:2003 Specification for ancillary components for masonry-Part 2: Linterls.
EN 845-2:2003砖石工程用辅助组件规范，第2部分：门窗过梁
EN 845-3:2003 Specification for ancillary components for masonry-Part 3: Bed joint reinforcement of steel meshwork.
EN 845-3:2003砖石工程用辅助组件规范，第3部分：钢筛网底层接隙加筋
EN 998-2:2010 Specification for mortar for masonry Part 2 Masonry mortar.
EN 998-2:2010 砌体用砂浆规范，第2部分：砌体砂浆。
EN 771-1:2011 Specification for masonry units – Part 1：Clay masonry units.
EN 771-1:2011 砌块产品规范，第1部分：粘土砌块。
EN 771-2:2011 Specification for masonry units – Part 2：Calcium silicate masonry units.
EN 771-2:2011砌块产品规范，第2部分：硅酸钙砌块。
EN 771-3:2011 Specification for masonry units. Part 3：Aggregate concrete masonry units (dense and light weight aggregates).
EN 771-3-2011 砌块产品规范，第3部分：集料混凝土砌块(密实和轻质集料)。
EN 771-4:2011 Specification for masonry units – Part 4: Autoclaved aerated concrete masonry units.
EN 771-4:2011圬工设施规格，第4部分：高压蒸养加气混凝土砌块。
EN 771-5:2011 Specification for masonry units Manufactured stone masonry units
EN 771-5:2011砌块产品规范，第5部分：人造石料砌块。
EN 771-6-2011 Specification for masonry units.Natural stone masonry units.
EN 771-6-2011 砖石工程砌块规范.第6部分：天然石料砖石工程砌块
EN 13282-1:2013 Hydraulic road bindersRapid hardening hydraulic road binders. Composition, specifications and conformity criteria.
EN 13282-1:2013 液压道路粘结剂，快速硬化液压道路粘合剂成分，规范和合格标准。
EN 413-1:2011 Masonry cement-Part 1: Composition, specifications and conformity criteria.
EN 413-1:2011砌筑水泥，第1部分：组成，规范和合格标准。
EN14647:2005/AC:2006 Cements,building limes and other hydraulic blinders-Calcium aluminate cements(preparation of concrete,mortar,grout and other mixes for construction and manufacture of construction products).
EN14647:2005/AC:2006 水泥，建筑石灰和其他液压的砖石水泥（混凝土，砂浆，水泥浆和其他建筑产品结构和制造混合编制）。
EN 15743-2010 Supersulfated cement. Composition, specifications and conformity criteria.
EN 15743-2010 富硫酸盐水泥，组分、规范和一致性标准。
EN 14216:2004 Cement. Composition, specifications and conformity criteria for very low heat special cements.
EN 14216:2004 水泥，超低热特种水泥的组分、规范和合格准则。
EN 197-1:2011 Cement -Part 1: Composition, specifications and conformity criteria for common cements.
EN 197-1:2011水泥.第1部分:普通水泥的成分,规格和合格标准
EN 1433:2002 Drainage channels for vehicular and pedestrian areas-Classification, design and testing requirements, marking and evaluation of conformity.
EN 1433:2002车辆和行人通过区域的排水沟盖和人孔盖、设计要求、型号试验、标志。
EN 12566-3:2005+A1:2009 Small wastewater treatment systems for up to 50PT-Part 3: Packaged and/or site assembles domestic wastewater treatment plants.
EN 12566-3:2005+A1:2009 小于50 PT的小型废水处理系统，包装的和或现场装配的生活废水处理设备
EN 14374:2004 Timber structures. Structural laminated veneer lumber. requirement.
EN 14374:2004 木结构, 结构层压板，要求。
EN 14250:2010 Timber structures-Product requirements for prefabricated structural members assembled with punched metal plate fasteners.
EN 14250:2010木结构，装配穿孔金属板紧固件的预制结构组件的生产要求。
EN 14081-1:2005+A1:2011 Timber structures. Strength graded structural timber with rectangular cross section General requirements.
EN 14081-1:2005+A1:2011 木结构，带矩形横截面的强度分级结构木材，一般要求。
EN 14080:2005 Timber structures-Glued laminated timber-requirements.
EN 14080:2005 木结构、胶合层压板、要求。
EN 13986:2004 Wood-based panels for use in construction-characteristics, evaluation of conformity and marking.
EN 13986:2004建筑用木质板条特性，合格评定和标记
EN 14509:2006+AC:2008 Self-supporting double skin metal faced insulation panels-Factory made products-Specifications.
EN 14509:2006+AC:2008 可自撑双面金属的绝热隔热板，工厂制作产品规范。（夹芯板）
EN 14388:2005+A1:2008 Road traffic noise reducing devices. Specification.
EN 14388:2005+A1:2008道路交通减噪装置，规范。
EN 13830:2003 Curtain walling-Product standard.
EN 13830:2003 幕墙-产品标准。
EN 40-1 Lighting columns – Part 1: Definitions and terms.
prEN 40-2:1999 Lighting columns – Part 2: General requirements and dimensions.
EN 40-3-1 Lighting columns – Design and verification – Part 3-1: Specification for
characteristic loads.
EN 40-3-2 Lighting columns – Design and verification – Part 3-2: Verification by testing.
prEN 40-3-3 Lighting columns – Design and verification – Part 3-3: Verification by
calculation.
EN 40-4:2005/AC:2006灯柱-钢筋混凝土和预应力混凝土灯柱的要求。
EN 40-4:2005/AC:2006 Requirement for reinforced and prestressed concrete lighting columns.
EN 40-5:2002灯柱-钢灯柱的要求。
EN 40-5:2002 Lighting columns-Part 5: Requirements for steel lighting columns.。
EN 40-6:2002 灯柱-铝灯柱的要求。
EN 40-6:2002 Lighting columns-Part 6: Requirements for aluminium lighting columns.。
EN 40-7:2002灯柱-纤维增强聚脂复合灯柱的要求。
EN 407:2002 Lighting columns-Part 7: Requirements for fibre reinforced polymer composite lighting columns.
EN 14471:2005 Chimneys – System chimneys with plastic flue liners – Requirements and test methods
EN 14471:2005 烟囱，带塑料烟道衬的整体烟囱，要求和试验方法。
EN 13084-7:2012 free-standing chimneys – Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners.
EN 13084-7:2005 独立式烟囱.第7部分：用于单层壁钢质烟囱和钢内衬的圆柱钢结构产品规格。
EN1858:2008+A1:2011 Chimneys- Components-Concrete flue blocks.
EN1858:2008+A1:2011烟囱，部件，水泥烟道砖。
EN 1856-2:2009 Chimneys – Requirements for metal chimneys – Part 2: Metal flue liners and connection flue pipes.
EN 1856-2:2009 烟囱，金属烟囱要求，第2部分：金属衬套和烟道管。
EN 1856-1:2009 Chimneys – Requirements for metal chimneys – Part 1: System chimney products.
EN 1856-1:2009 烟囱.金属烟囱要求，第1部分：系统烟囱制品。
EN 1457-2:2012 Chimneys-Clay/ceramic flue liners-Part2:Flue liners operating under wet conditions-Requirements and test methods.
EN 1457-2:2012 烟囱.粘土/陶瓷烟道内衬，第2部分：烟道内衬在湿润条件下操作，要求和试验方法。
EN 1457-1:2012 Chimneys-Clay/ceramic flue liners-Part1:Flue liners operating under dry conditions-Requirements and test methods.
EN 1457-1:2012 烟囱.粘土/陶瓷烟道内衬，第1部分：烟道内衬在干燥条件下操作，要求和试验方法。
EN 1457:1999/A1:2002/AC:2007 Chimneys – Clay/ceramic flue liners – Requirements and test methods。
EN 1457:1999/A1:2002/AC:2007 烟囱.粘土/陶瓷管衬.要求和检验方法。
EN 13069:2005 Chimneys – Clay/ceramic outer walls for system chimneys – Requirements and test methods.
EN 13069:2005 烟囱.烟囱系统用粘土/陶瓷外壁.要求和试验方法。
EN13063-3:2007 Chimneys-System chimneys with clay/ceramic flue liners-Part 1: Requirements and test methods for sootfire resistance.
EN13063-3:2007 烟囱。带粘土/陶瓷烟道内衬的烟囱系统。第3部分：空气烟道系统烟囱的要求和试验方法。
EN 13063-2:2005+A1:2007 Chimneys-System chimneys with clay/ceramic flue liners-Part 1: Requirements and test methods for sootfire resistance.
EN 13063-2:2005+A1:2007 烟囱。带粘土/陶瓷烟道内衬的烟囱系统。第2部分：潮湿条件下的要求和试验方法。
EN 13063-1:2005+A1:2007 Chimneys-System chimneys with clay/ceramic flue liners-Part 1: Requirements and test methods for sootfire resistance.
EN 13063-1:2005+A1:2007 烟囱。带粘土/陶瓷烟道内衬的烟囱系统。第1部分：防烟火用要求和试验方法。
EN 12446:2011 Chimneys-Components-Concrete outer wall elements.
EN 12446:2011 烟道-部件-混凝土外墙构件。
EN14304:2009 Thermal insulation products for building equipment and industrial installations-Factory made flexible electrometric foam (FEF)Products-Specification。
EN14304:2009建筑设备和工业设施用隔热制品，人造的柔性发泡材料(FEF)产品，规范。
EN14303:2009 Thermal insulation products for building equipment and industrial installations-Factory made mineral wool(MW) products-Specification.
EN14303:2009建筑设备和工业装置用热绝缘产品。工厂制造矿物棉产品(MW).规范。
EN 12368:2006 Traffic control equipment-Signal heads.
EN 12368:2006 交通控制设备-信号灯头
EN13263-1-2005+A1-2009 Silica fume for concrete — Part 1 Definitions, requirements and conformity criteria.
EN13263-1-2005+A1-2009 混凝土用含硅烟气，定义、要求和一致性标准。
EN 13263-2:2005+A1:2009 Silica fume for concrete-Part 2: Conformity evaluation
EN 13263-2:2005+A1:2009 混凝土用含硅烟气-一致性评估。
EN14321-2:2005 Glass in building-Thermally toughened alkaline earth silicate safety glass-Part2:Evaluation of conformity/Productstandard.
EN14321-2:2005 建筑物玻璃.热钢化碱土硅酸盐安全玻璃.第2部分:合格评价/产品标准.
EN14179-2:2005 Glass in building-Heat soaked thermally toughened sodali mesilicate safety glass-Part2:Evaluation of conformity/Product standard
EN14179-2:2005 建筑用玻璃.吸热热钢化钙钠硅酸盐安全玻璃.第2部分:合格评定/产品标准.
EN14178-2:2004 Glass in Building – Basic alkaline earth silicate glass products – Part 2: Evaluation of conformity/Product standard; German version EN 14178-2:2004
EN14178-2:2004 建筑物用玻璃.基本碱土硅酸盐玻璃制品.第2部分:合格评价/产品标准.
EN13024-2:2004 Glass in building – Thermally toughened borosilicate safety glass – Part 2: Evaluation of conformity/Product standard; German version EN 13024-2:2004
EN13024-2:2004 建筑用玻璃.热钢化硼硅酸盐安全玻璃.第2部分:合格评价/产品标准.
EN12337-2:2004 Glass in building – Chemically strengthed soda lime silicate glass – Evaluation of conformity/Product standard
EN12337-2:2004 建筑物用玻璃.化学增强钠钙硅酸盐玻璃.合格评价/产品标准.
EN12150-2-2004 Glass in building-Thermally toughened soda lime silicate safety glass -Part 2 Evaluation of conformity Product standard.
EN12150-2-2004 建筑玻璃-热钢化钠钙硅酸盐安全玻璃-第2部分：合格评定/产品标准.
EN1096-4:2004 Glass in building-Coatedglass-Evaluation of conformity/Product standard.
EN1096-4:2004 建筑玻璃.涂层玻璃.合格评价/产品标准.
EN13240:2001/AC:2006 Roomheaters fired by solid fuel – Requirements and test methods
EN13240:2001/AC:2006 使用固体燃料的室内加热器.要求和试验方法.
EN13229:2001/AC:2006 家用带火苗的固体燃料取暖器具.要求和试验方法.
EN13229:2001/AC:2006 Inset appliances including open fires fired by solid fuels-Requirement sand test methods.
EN 12004-2007 瓷砖用粘合剂.要求、一致性评估、分类和标识.
EN 12004-2007 Adhesives for tiles-Requirements,evaluation of conformity,classification and designation.
防火要求的地板需要做
EN13501-1:2007 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS. CLASSIFICATION USING TEST DATA FROM REACTION TO FIRE TESTS(Flooring)
EN ISO 9239-1:2002Reaction to fire tests. Horizontal surface spread of flame on floor-covering systems. Determination of the burning behaviour using a radiant heat source
EN ISO1182:2002 Reaction to fire tests for building products. Non-combustibility test
EN ISO1716:2002 Reaction to fire tests for building products. Determination of the heat of combustiont
EN ISO11925-2:2002Reaction to fire tests. Ignitability of building products subjected
EN 649: 1996 + A1:2003 Resilient floor coverings – Homogeneous and heterogeneous polyvinyl chloride floor coverings – Specification
弹性地板层—均质和非均质聚氯乙稀地板层—规范
Individual Test of Resilient Floor Coverings 弹性地板层的个别测试
Standards No. Test item
EN 423:94 Resilient floor coverings — Determination of the resistance to staining 弹性地板层—抗污性能的测定
EN 424:01 Resilient floor coverings — Determination of the effect of simulated movement of a furniture leg 弹性地板层—家具腿模拟移动耐磨效应的测定
EN 425:94 Resilient floor coverings — Determination of the effect of a castor chair 弹性地板层—椅子脚轮的影响
EN 427:94 Resilient floor coverings — Determination of the side length, squareness and straightness of tiles 弹性地板层—边长，地板直角度以及直线度
EN 428:93 Resilient floor coverings — Determination of overall thickness 弹性地板层—整体厚度的确定
EN 429:93 Resilient floor coverings — Determination of the thickness of layers 弹性地板层—层厚度的确定
EN 430:94 Resilient floor coverings — Determination of mass per unit area 弹性地板层—单位面积内的质量
EN 431:94 Resilient floor coverings — Determination of peel strength 弹性地板层—耐剥落性能确定
EN 432:94 Resilient floor coverings — Determination of shear force 弹性地板层—切变应力测定
EN 433:94 Resilient floor coverings — Determination of residual indentation after static loading 弹性地板层—静载负荷后的残留压痕
EN 434:94 Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat 弹性地板层—加热后尺寸稳定性及卷曲变形
EN 435:94 Resilient floor coverings — Determination of flexibility 弹性地板层—柔韧性测定
EN 436:94 Resilient floor coverings — Determination of density 弹性地板层—密度的测定（Method A）
EN 660-2: 99 Resilient floor coverings — Determination of wear resistance 弹性地板层—抗磨损性的测试
EN 310 Wood-based panels – Determination of modulus of elasticity in bending and bending strength 木基板—弯曲强度及弯曲弹性模数的测定
Fireboard / 纤维板
EN 622-1 Fibreboards – Specifications – Part 1: General requirements
纤维板—规范—第一部分：一般要求
EN 622-2 Fibreboards – Specifications – Part 2: Requirements for hardboards
纤维板—规范—第二部分：硬木板的要求
EN 622-3 Fibreboards – Specifications – Part 3: Requirements for medium boards
纤维板—规范—第三部分：中密度板的要求
EN 622-4 Fibreboards – Specifications – Part 4: Requirements for softboards
纤维板—规范—第四部分：软质纤维板的要求
EN 622-5 Fibreboards – Specifications – Part 5: Requirements for dry process boards (MDF) 纤维板—规范—第五部分：干加工中密度板（MDF）的要求
EN 312:2003 Particleboards-Specifications 木屑板－规范
EN 13329 Laminate floor coverings – Specifications, requirements and test methods 复合地板—规范、要求以及测试方法
EN 14041：2004 Resilient，textile and laminate floor coverings— Essential Characteristics弹性、纺织和叠层地板覆盖物.基本特性
EN14306:2009 Thermal insulation products for building equipment and industrial and industrial installations-Factory made calcium silicate (CS) products specification. 建筑设备和工业装置用热绝缘产品。工厂制硅酸钙(CS)产品，规范
