Z96-09该标准和ANSI/ISEA 107.以及欧盟EN471（被EN ISO20471：2013替代)要求接近。

8-2007Colorfastness to Crocking: AATCC Crockmeter Method

15-2007Colorfastness to Perspiration

16-2004Colorfastness to Light

22-2005Water Repellency: Spray Test

35-2006Water Resistance — Rain Test

61-2007Colorfastness to Laundering: Accelerated

107-2007Colorfastness to Water

127-2003Water Resistance: Hydrostatic Pressure Test

131-2005Colorfastness to Pleating: Steam Pleating

132-2004Colorfastness to Drycleaning

135-2004Dimensional Changes of Fabrics after Home Laundering

D 1424-07aStandard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus

D 1776-04Standard Practice for Conditioning and Testing Textiles

D 2724-07Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics

D 3787-07Standard Test Method for Bursting Strength of Textile — Constant-Rate-of-Traverse (CRT) Ball Burst Test

E 96/E 96M-05Standard Test Methods for Water Vapor Transmission of Materials

E 284-08Standard Terminology of Appearance

E 808-01Standard Practice for Describing Retroreflection

E 809-08Standard Practice for Measuring Photometric Characteristics of Retroreflectors

E 1164-07Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation

F 1506-08Standard Performance Specification for Flame Resistant Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards

F 1891-06Standard Specification for Arc and Flame Resistant Rainwear

CAN/CGSB-4.2 No. 11.2-M89Textile Test Methods — Bursting Strength — Ball Burst Test

CAN/CGSB-4.2 No. 19.1-2004Textile Text Methods — Colourfastness to Washing — Accelerated Test — Launder-Ometer

CAN/CGSB-4.2 No. 20-M89Textile Test Methods — Colourfastness to Water

CAN/CGSB-4.2 No. 22-2004Textile Test Methods — Colourfastness to Rubbing (Crocking)

CAN/CGSB-4.2 No. 23-M90Textile Test Methods — Colourfastness to Perspiration

CAN/CGSB-4.2 No. 29.1-M89Textile Test Methods — Colourfastness to Dry Cleaning Solvent

CAN/CGSB-4.2 No. 57-M90Textile Test Methods — Determination of Maximum Safe Ironing Temperature

CAN/CGSB-4.2 No. 58-2004Textile Test Methods — Colourfastness and Dimensional Change in Domestic Laundering of Textiles

CAN/CGSB-86.1-2003Care Labelling of Textiles

CAN/CGSB-155.20-2000Workwear for Protection Against Hydrocarbon Flash Fire

CAN/CGSB-4.2 No. 12.3-2005/ISO 13937-1:2000Textile Test Methods — Textiles — Tear Properties of Fabrics — Part 1: Determination of Tear Force Using

Ballistic Pendulum Method (Elmendorf)

CAN/CGSB-4.2 No. 26.2-94/ISO 4920:1981Textile Test Methods — Textile Fabrics — Determination of Resistance to Surface Wetting (Spray Test)

CAN/CGSB-4.2 No. 26.3-95/ISO 811:1981Textile Test Methods — Textile Fabrics — Determination of Resistance to Water Penetration — Hydrostatic Pressure Test

2112-2007Standard on Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire

105-B02:1994Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test

3175:1995 (withdrawn)Textiles — Determination of dimensional change on dry cleaning in perchloroethylene — Machine method

4675:1990Rubber- or plastics-coated fabrics — Low-temperature bend test

6330:2000Textiles — Domestic washing and drying procedures for textile testing

7854:1995Rubber- or plastics-coated fabrics — Determination of resistance to damage by flexing

EN 530:2010Abrasion resistance of protective clothing material – Test methods

EN ISO 20471：2013High visibility clothing – Test methods and requirements (ISO20471:2013)

该标准替代EN471：2003+A1：2007标准，EN471于2013年9月30废止。

CAN/CSA-Z94.1-05Industrial protective headwear — Performance, selection, care, and use

背景和条纹距离大于50mm–要求等同EN ISO20471：2013

袖子或裤腿反光条纹要环绕胳膊或腿

腿部条纹应在膝盖或膝盖下面

不反光的标识补丁尺寸不能超过100 cm2 并且不能覆盖反光材料

反光的标识补丁尺寸不能超过 500 cm2

标识补丁的颜色：绿色为医疗紧急使用，红色为防火使用，蓝色为警察使用

30mm直径的测试面积 ，破裂强度至少133N，测试依据CAN/CGSB-4.2 No. 11.2 or ASTM D 3787.—测试面积和强度跟EN ISO20471有所区别

背景材料抗撕裂性各方向最少13N，测试依据CAN/CGSB-4.2 No. 12.3/ISO 13937or ASTM D 1424.

加拿大温度的特点，低温下测试temperature of –20 ± 1 °C.

清洗说明体现在说明书中以及标签中

反光服标识内容：

The marking shall include the following information:

(a) name, trademark, or other means of identification of the manufacturer or authorized representative;

(b) designation of the product type (e.g., coverall, vest), commercial name, or code;

(c) size designation;

(d) CSA Z96;

(e) apparel class and level of performance for the retroreflective material;

(f) an indication of background material as “fluorescent” or “bright-coloured”; and

4 Garment class and design

4.1 Classes of high-visibility safety apparel (HVSA)

4.2 Garment design

4.2.1 Retroreflective or combined-performance stripes/bands

4.2.2 Coloured stripes/bands — configurations

4.2.3 Background material

4.2.4 ID patches and lettering

4.2.5 Tear-away capability

4.3 Apparel design considerations for emergency first-responder HVSA

5 Requirements for background and combined-performance retroreflective materials

5.1 Colour of background and combined-performance materials

5.2 Colourfastness properties for background materials

5.2.1 Colourfastness to light (Xenon)

5.2.2 Colourfastness to crocking

5.2.3 Colourfastness to perspiration

5.2.4 Colourfastness properties related to care labeling

5.3 Dimensional change for background materials

5.4 Mechanical properties of background materials

5.4.1 Bursting strength of knitted and other nonwoven materials

5.4.2 Tear resistance of woven materials (uncoated, coated, or laminated)

5.5 Performance under wet conditions

5.5.1 Water repellency

5.5.2 Water resistance

5.5.3 Water penetration

5.6 Water vapour permeability for background materials classified as breathable

5.7 Ergonomics

6 Photometric and physical performance requirements for retroreflective materials

6.1 Performance of retroreflective material prior to test exposures

6.2 Performance of retroreflective material after test exposures

7 Flame- or flash-resistant (FR) garment applications

7.1 Application

7.2 FR garment design

7.2.1 FR-application background material

7.2.2 FR-application stripes/bands

7.3 FR-application garment marking

8 Test methods

8.1 Sampling and conditioning